Miccus MHRTX-20, Быстрый старт

Страница: 2 / 16

Quick Start Guide:
1. Attachtheantenna:On the back of the Home RTX 2.0, remove
the white cover and attach the antenna. Turn clockwise until
slightly snug. Position the antenna upright.
2. Connecttheaudio:Connect the appropriate included cable
(Optical/TOSLINK or RCA to 3.5mm) to the appropriate audio
input (TX mode only) or output (RX mode only) on the back of
the RTX 2.0.
3. Poweron/off:Connect the micro end of the USB cable to the
RTX 2.0 and the other end to any USB port or 5v/500mA USB
power supply; the Home RTX 2.0 will automatically power on.
If powered off, the Home RTX 2.0 can be powered back on by
holding the multi-function button for 5 seconds until the LED
indicators power on.
4. Pairing:
1. Set the selector switch to TX (transmit mode), or RX (receive
mode)
2. Place your Bluetooth® receiving or transmitting device into
pairing mode.
3. Place the Home RTX 2.0 into pairing mode by pressing the
multi-function button for 3 seconds until a until a channel (CH)
blue light begins flashing rapidly. This indicates pairing mode.
4. Once paired the CH LED light will change to either solid blue or
blink twice every 5 seconds if connected in aptX Low Latency.
Note: if your phone or tablet requires a passkey use: 0000
CH1 or CH2 LED Function
Rapidly Flashing Blue Pairing mode
Solid Blue Connected with SBC or aptX
codecs (slight delay)
2 blue blinks every 5 seconds Connected with aptX Low
Latency codec (no delay)
1