Miccus Home RTX 2.0, Руководство пользователя

Страница: 2 / 9

Quick Start Guide:
1. Attachtheantenna:on the back of the Miccus® Home RTX 2.0,
remove the white rubber connector cover and attach the supplied
antenna to the antenna terminal (turn clockwise until slightly snug).
Optimize antenna performance by positioning the antenna upright.
2. ConnectingtotheMiccus®HomeRTX2.0:Connect the appropri-
ate included cable (Optical/TOSLINK or RCA to 3.5mm) to the
appropriate audio input (TX mode only) or output (RX mode only)
on the back of the RTX 2.0.
3. Poweron/off:Before connecting to power, set the selector switch
to TX (transmit mode), or RX (receive mode). The Miccus® Home
RTX 2.0 can be operated using any USB port or 5v/500mA USB
power supply. Connect the micro end of the USB cable to the
RTX 2.0 and the other end to USB power; the Home RTX 2.0 will
automatically power on. If powered off, the Home RTX 2.0 can be
powered back on by holding the multi-function/power button
for 5 seconds until the LED indicators power on.
4. Paring: Place your Bluetooth® receiving or transmitting device
into pairing mode; follow the manufacturer specific instructions.
Then press and hold the Home RTX 2.0 multi-function/ power
button for 3 seconds until a channel (CH) indicator light begins
fast flashing. This indicates pairing mode. Once paired the
appropriate CH indicator LED will light solid and blink every
5 seconds in accordance with the codec being used. Note: if
your phone or tablet requires a passkey for pairing use: 0000
5. Dual-Link Pairing: Dual link pairing allows for two Bluetooth®
receiving devices to pair with the Miccus® Home RTX 2.0
simultaneously. Once you’ve paired your first set of headphones
to the Miccus® Home RTX 2.0 (step 4 above), to pair a second
set of headphones, press and hold the RTX 2.0 multi-function/
power button for 3 seconds until the CH indicator light begins fast
flashing. Once the second set of headphones is paired, both CH
indicator lights will be solid or blink every 5 seconds in accordance
with the codec being used.
1
Note: The Home RTX 2.0 can transmit dual audio streams using the
aptX Low Latency codec. The Home RTX 2.0 automatically recognizes an
audio feed as either digital optical, or 3.5mm analog according to the
cable connected.
CH1 or CH2 LED SOLID BLUE RTX 2.0 connected with
SBC or aptX codecs
CH1 or CH2 LED blue 2 blinks
every 5 seconds
RTX 2.0 connected with
aptX Low Latency codec
For detailed instructions and troubleshooting please continue reading
the Miccus® Home RTX 2.0 user manual or visit www.miccus.com for
how-to videos.
AbouttheMiccus®HomeRTX2.0
The Miccus® Home RTX 2.0 is the first dual link long range
wireless transmitter or receiver featuring Bluetooth® v4.2 and
two simultaneous aptX Low Latency audio streams. Use as either a
Bluetooth® receiver or transmitter and add Bluetooth® technology
to your existing television or stereo equipment. The Home RTX 2.0
supports dual link pairing; which means two devices can be paired at the
same time. The Miccus® Home RTX 2.0 also features optical audio pass
thru. Use the same audio source and daisy chain two or more Miccus®
Home RTX 2.0’s together; double or even triple the number of low latency
audio streams available for use. Avoid the use of an optical splitter box;
use the digital audio pass thru of the Home RTX 2.0 to send television
audio to both the RTX 2.0 and your soundbar.
What’sintheBox?
2
A. Miccus® Home RTX 2.0
B. Dipole Antenna
C. Optical / TOSLINK digital
audio cable
D. 3.5mm male to 3.5mm
male Audio Cable
E. Micro USB charging cable
F. USB Power Supply
G. User Manual