Copyright © 2009-2019 Micca. All rights reserved.
Page | 5
4 Connection and Setup
For best results, please follow the connection and setup instructions below. The technical
support team is standing by to help answer any questions or address difficulties encountered.
Please email
.
The diagram below illustrates how the HDMI transmitter and receiver can be used to wirelessly
extend HDMI audio signal, and optionally the IR remote control signal.
Please follow the numbered connection and setup sequence below for optimal results:
1. Place the HDMI Transmitter and HDMI Receiver at locations which has the least amount of
obstruction in between. A clear line-of-sight will provide the best results. Orient the
transmitter and receiver antennas vertically.
2. Connect the HDMI signal source such as a DVD player to the HDMI Input jack on the HDMI
Transmitter.
3. [Optional] Connect the IR Blaster cable to the HDMI Transmitter. Place the IR Blaster near
the remote control sensor window on the DVD player.
4. [Optional] A HDMI display device such as a TV or monitor can be connected to the HDMI
Output jack on the HDMI Transmitter.
5. Connect a HDMI display device such as a TV or monitor to the HDMI Output jack on the
HDMI Receiver. Turn on the power for the TV or monitor.
6. [Optional] Connect the IR Receiver cable to the HDMI Receiver. Place the IR Receiver at a
location where it can easily “see” the remote control signal.
7. Connect power to the HDMI Transmitter and Receiver, the Wireless Status lights on the
transmitter and receiver will blink, and the TV will display the message “Status: Waiting for