Copyright © 2009-2015 Micca All rights reserved.
4 Getting Started
4.1 Initial Setup
Find a flat and stable surface to place the photo frame. Swing out the built in stand fully
to prop up the photo frame – make sure the stand is fully extended or else it will
collapse during use.
Plug the AC adapter into a standard 110V AC or 240V AC electrical outlet and connect it
to the DC Power Input on the photo frame. The photo frame should automatically turn
on and display the main menu. Carefully remove the protective film covering the LCD.
Your digital photo frame is now ready for use.
4.2 Basic Usage
The photo frame is very easy to use. It is pre-configured from the factory with default
settings that are already optimized for most users. Simply copy your favorite photos
onto a USB storage drive using a computer. Insert the USB storage drive into the USB
jack on the photo frame, turn the photo frame on, and the photos will automatically
begin displaying. To turn the photo frame On or Off, press and hold the “MENU” button.
Mac OS users, please see additional instructions in the troubleshooting section at the
end of this manual.
