Micca M1503ZM, Руководство пользователя, Страница: 7 / 20

Copyright © 2009 - 2015 Micca All rights reserved.
4 Getting Started
4.1 Initial Setup
Find a flat and stable surface to place the photo frame. Install the prop - stand by
inserting it into the mounting hole on the back of the photo frame.
Plug the AC adapter into a standard 110V AC or 240V AC electrical outlet and connect it
to the DC Power Input on the photo frame. The photo frame should automatically turn
on and display the main menu. Carefully remove the protective film covering the LCD.
Remove the plastic battery insulator from the battery compartment. Your digital photo
frame is now ready for use.
4.2 Basic Usage
The photo frame is very easy to use. It is pre - configured from the factory with default
settings that are already optimized for most users. Simply copy your favorite photos
onto the included 8GB storage media using a computer. Insert the storage media into
the photo frame, turn the photo frame on, and the slideshow will automatically begin.
4.3 Motion Sensor
The photo frame will automatically turn on when nearby motion is detected, and turn off
when the timer expires without nearby motion. The unique instant
-
on capability resumes
playback within 1 second of motion detection. The default timer of 1 hour can be
changed to a more suitable value in the settings menu, or disabled completely.
The sensor is located on the lower right hand corner of the photo frame and should not
be blocked by any objects including transparent glass. The range of the motion sensor
is approximately 15 feet depending on other environmental variables.