Copyright © 2009-2016 Micca All rights reserved.
160809
Available Settings: Enable, Disable
Motion Sensor Timer (M123A-M and M153A-M Only)
– Set the motion
sensor timer. The photo frame will automatically power off after being on for the
configured amount of time without detecting any motion.
Available Settings: 1/3/5/15/30 Minutes, 1/2/3 Hours
Reset Settings
- Reset all settings back to factory defaults.
Version
- Display the current firmware version. This information is important for
determining if a firmware update is available.
System Upgrade
- Upgrade the photo frame firmware. If newer firmware is
available, it can be downloaded from our support website
www.miccatron.com
. Detailed
instructions for its installation will be provided along with the firmware update.