Copyright © 2009
-
2013 Micca, LTD. All rights reserved.
5
Operating Instructions
After turning on the photo frame, the main menu
will display after a few seconds. If there is a flash
memory card or USB flash drive inserted into the
photo frame, a slideshow will automatically begin
plain. To get back to the main menu, press the
“Menu” button on the remote control, or press and
hold the “Menu/Return” button on the back of the
photo frame.
The main menu contains icons for Photos, Music,
Videos, File Operations, Calendar, and Setup.
5.1
Flash Memory Cards and USB Flash Drives
The photo frame supports SD/SDHC flash memory cards and USB flash drives, both up
to 32GB in size. While the photo frame can handle high resolution photos directly from a
digital camera, it is strongly recommended to resize photos down to a lower resolution
of about one megapixel in size. This allows more photos to be stored on the storage
device and smaller files results in more responsive operation by the photo frame.
The photo frame comes with an 8GB micro USB storage drive that can be used to hold
photos, music, or videos. The photo frame does
not have any internal storage.
5.2
Choosing Storage Device
When more than one storage device is detected
by the digital photo frame, it is necessary to
select which storage device to use. Once
selected, all operations are on the selected
storage device. To perform operations on another
storage device, it is necessary to select it first.
To select a storage device, press the “Menu/Return” button repeatedly until the storage
selection screen is shown. Highlight the desired storage device and press
“Play/Pause/Enter” to select it.
5.3
Viewing Photos
When a storage device loaded with photos is inserted, the digital photo frame will
automatically start displaying a photo slideshow when it is turned on. The user can also
