PAGE 2
What’s required
#1 Phillips Screwdriver
5.5mm nut driver or wrench
Scissors/cutters/etc.
Let’s get started!
Warning: Installation of this kit into a 3DR Solo drone should be done by an experienced
person, in adherence with all recommendations and guidelines of the Solo manufacturer. Before
assembling this kit, ensure the Solo is not powered, has the battery removed, and the rotor
blades removed. Failure to follow these instructions can result in injury and/or damage to the
Solo or RedEdge.
Attaching the power board
1. Remove the three screws on the 3DR Solo gimbal bay cover.
Arrows indicate which screws to
remove to remove gimbal bay cover.
2. Pull off the gimbal bay cover.
Gimbal bay cover shown removed.
