RedEdge 3 User Manual Rev 06
© 2015 MicaSense, Inc. Page 18 of 33
3.5.1. Timer Mode
1. Use the drop-down menu to select Auto-Capture
Mode as “Timer”
Figure 12: Timer Mode
2. In the updated window, specify the interval between pictures to the desired setting. If
the timer interval is set to less than 1.0 seconds, the camera will capture as quickly as
it can (about once a second).
3.
Press the “Save” button to save the Timer mode settings.
4. Press the Start button to begin capturing images at the desired interval rate.
5. Press the Stop button to stop capturing images
6. You can review and verify that images are being captured by selecting the Live View
page. Use the “Multi” setting in that page to verify that all five imagers are functioning
correctly and the images displayed are being updated at the interval rate selected.
