Electrical Safety and You
Before using this appliance please read and fully understand the
safety directions in this manual. Ensure that you know how to
operate the appliance. All electrical equipment presents a risk to
the end user. We ask that you use this appliance in a sensible
safe manner in accordance with the instructions supplied for
your own safety.
If for any reason the appliance does not function correctly or
shows signs of damage please return it immediately to the
retailer or contact the help line below.
New Zealand call toll free 0508 ASIAPAC (274 2722)
Australia call +64 9 974 9206
MICASA
Branded
product options and information.
Features
1500 Watt Cooking Power
Non Stick Cooking Surface
Power On/Off Indicator
Tempered Glass Lid
Cool Touch Handles
Lid Assembly
Place the lid knob on the outer glass lid surface and secure by
placing the large plastic washer and screw on the inside of the
lid and tighten.
DO NOT OVER TIGHTEN
Seasoning
Before use rub a small amount of cooking oil onto the base and
walls of the cooking surface and switch on to HIGH heat. Heat
for 2-3 minutes and remove. This should be performed every 3-
4 weeks.
Operation Guide
Important! First Time Use
Before using for the first time, wash the frying pan in warm
soapy water, rinse and dry.
Warning!
Do not immerse the
appliance fully in any liquid. Do not immerse past the level
indicated on the bottom and the area around the input socket.
Important! Non Stick Heating
It is best to set a cooking temperature at medium or lower when
using Non Stick fry pans for an extended period. The nonstick
surface is subject to scorching under extended high heat
conditions which will impair its nonstick properties.
Important! Location
Place the appliance on a smooth firm horizontal bench or table
top. Do not operate near combustible material such as walls,
curtains, flammable material or other heat surface. Keep a gap
around the appliance of at least 20cm.
Power Connection
Ensure the controller is set to
OFF
position (full anti-clockwise
position). Plug probe into the input socket of the appliance
firmly. Ensure it is fitted correctly. Connect the supply plug to a
suitable 220-240V ~50Hz power supply and switch on. This
appliance is designed to operate safely across both New
Zealand and Australian power supplies. This appliance is a
class 1 appliance and must be earthed.
Warning!
Only use with the supplied controller cord set.
Non Stick Surface
Cooking with non-stick surfaces reduces the need for cooking
oils. Discoloration of the surface will not reduce the
effectiveness of the surface. Do not use any metal objects on
the surface as this may damage the coating.
Cooking
Prepare your food to be cooked.
Warning!
Do not heat the appliance without oil or food in it.
Warning!
Not suitable for deep frying.
Once connected and ready for use select the desired cooking
heat setting (refer guide). The pilot light will illuminate showing
heating is on. Once the selected temperature has been reached
the pilot light will switch off. The light will cycle on and off as the
temperature is maintained.
Place food into pan and cook as desired.
Once the food is cooked switch the controller to the
OFF
position, switch the power off and remove the supply cord.
Remove food and allow to cool.
Warning!
The thermostat controller metal probe may be hot, do
not touch.
Tips
Warning!
If frying with oil do not allow the oil to overheat as it
may catch fire. If this happens put the lid on to extinguish the
fire or cover with a fire blanket. DO NOT put water on it.
Warning!
Do not move appliance whilst connected to the mains
supply. An appliance with hot oil is extremely dangerous.
Warning!
Do not leave plastic utensils in contact with the hot
surfaces.
Warning!
Do not place hot glass lid or pan under cold water.
Allow to cool first.
