1. Long press
"SET"
three seconds, device go into wifi
configuration mode when red indicator blinking.
2. Log in MiBoxer APP and click the
" + "
on the right top
corner, then select
"Waterproof LED controller(WL5-WP)"
.
Follow the hints to complete the device adding.
6. MiBoxer APP Control
1. Please check whether the input voltage of the constant
voltage power supply is in accordance with the controller,
and please check the connection of both the cathode and
anode.
2. Non-professional user cannot dismantle the controller
directly, otherwise, it may cause fire and electric shock.
3. Please do not use controller around the mental area and
high magnetic field, otherwise, it will badly affect the control
distance.
7. Attention
Controller input voltage must be in accordance with the
required voltage of LED Strips.
4. Connect diagram
Made in China
Red light
always-on
Disconnected
from network
Indicating light instruction:
Smart Link
mode
Networking
successfully
Received
signal
Device
malfunction
Red light
blinking
Green light
always-on
Green light
blinking
Yellow light
blinking
Input: DC12V-36V
Brown: V+
Blue: V-
V+
R
G
B
CW
V+
R
G
B
W
V+
R
G
B
V+
CW
CW
Output Mode ( LED Wiring )
WW
WW
WW
V+
W
W
W
W
W
Black
Red
Green
Blue
Yellow
White
RGB+CCT
RGBW
RGB
Dual White
Single Color
Mode
Wire
FUT089
FUT088
FUT092
FUT096
FUT006
FUT007
B8
B0
B1 / T1
B2 / T2
B3 / T3
B4 / T4
Compatible with these remote controls (Purchased separately)
Note:
the connection method is different for different output mode.
Please connect it according to below sheet.
RGBW LED lamps
v+
R
G
B
W
Color temp. LED lamps
WW
v+
CW
RGB LED lamps
G
B
v+
R
Single Color
Output mode connection diagram
Single color LED lamps
v-
v+
Dual White
Output mode connection diagram
NC
RGBW
Output mode connection diagram
NC
RGB+CCT LED lamps
v+
R
G
B
CW
WW
RGB+CCT
Output mode connection diagram
RGB
Output mode connection diagram
NC
5. RF Remote Link / Unlink
1. Short press the
" Link/Unlink "
button once on
the LED controller( or switch off the controller
power. After 10 seconds, switch on again). The
indicator light flashes red and green alternately.
2. Short press Link/Unlink button on the remote (i.e.
"
"
or
"
"
) 3 times within 3 seconds. The
green light flashing 3 times slowly means linking
successfully.
Long press
" Link/Unlink "
button on the LED
controller for 3 seconds. The red light flashing 10
times quickly means unlink successfully. (Or follow
the unlinking steps on the remote instruction.)
Link:
Unlink:
Note:
Remote controller need to be purchased separately. The
remote linking and unlinking method, please see details on
remote instruction.
Connect to LED lamps
