1. Connect light with power supply.
2. Ensure the light is always on ( please wait 5 seconds to turn off
light and turn on again if the light is in breathe ambience ).
3. Long press " " button in zone 3 seconds untill the pilot lamp
of remote flash slowly.
4. Make the remote with lights closely ( within 1m).
5. Matching is done if the light breathe 3 times.
4. Link and Unlink
(not added into gateway)
1. Connect light with power supply.
2. Ensure the light is always on.
3. Long press zone " " button with 3 seconds untill the indicator
of remote flash quickly
4. Make the remote with lights closely ( within 1m).
5. Dismatching is done if the light breathe 3 times.
Instruction of Matching
Instruction of Dismatching
Slide the brightness slider to adjust the brightness.
Touch the color ring to change colors.
Under white light mode, adjust color temperature;
Under color light mode, change color saturation.
ON
OFF
W
Switch to white color model
Master on, turn on all lights which had linked.
Master off, turn off all lights which had linked.
