6. Signal transmi�ng
One light can transmit the signals from the remote control to another light within 30m, as long as
there is a light within 30m, the remote control distance can be limitless.
Distance 30m
Different lights can work synchronously when they are started at different �mes, light by the same
remote, under same dynamic mode and within 30m distance.
7. Modes synchroniza�on
Signal transmi�ng &
Modes synchroniza�on
The same dynamic mode, the same speed can be synchronized.
Light
Light
8. The mode of “Do Not Disturb”
It can be ac�vated or turned off via remote control
Turn on “Do not disturb” (wide using in the area which have power failure frequently to save
energy)
Press “OFF” bu�on three �mes within three seconds and press “ON” bu�on three �mes,
Ac�vated successfully once led light flashes four �mes quickly.
A�en�on:
Do not disturb mode is ac�vated
1. When the light is OFF status (For example: Use app or remote to turn off light)
The light is ON status once you turn off and turn on power one �me.
2. When the light is ON status
The light is OFF status once you turn off power and turn on again.
(User must turn off and turn
on power twice �mes to ac�vate light or use APP / remote to ac�vate light)
Press “ON” bu�on three �mes within three seconds and press “OFF” bu�on three �mes, closed
successfully once led light flashes four �mes slowly.
A�en�on:
The light will be always “ON” status if you turn on and turn off power once user closed
“Do not Disturb” mode.
Turn off “Do not disturb”
