02
LCD Display Introduction
Large LCD display, real-time display of charging voltage, charging current,
charging time, charging mode, battery type, battery resistance, battery
capacity, power percentage and other data, allowing you more intuitive to
understand the battery charge status. If there is no operation, the LCD
backlight will dim after 1 minute.
1
st
slot
2
nd
slot
3
rd
slot
4
th
slot
5
th
slot
6
th
slot
7
th
slot
8
th
slot
Batteries detection and error
Batteries activation and detection
When the batteries is reversed
The current channel’s batteries
symbol flashing and show
“ ”
.
When the batteries is short-circuited
Correctly put into the battery, check is OK, enter into the normal state of
charge.
Errors
1. Connect the power supply.
2. Put the battery into any channel, the charger starts to detect battery-related
data and display it on the LCD screen.
3. Without any setting the charger will automatically distribute the charging
current according to the internal resistance of the battery.
4. Short press to switch C1-C8 channel. And the backlight of LCD will
turn on.
Users Manual
LiFePO4 / 4.35V Li-ion battery, the charger can not be identified
automatically, you need to manually select the battery type.
If the LiFePO4 is not set manually, the charger will charged the
battery as Li-ion 4.2V and the battery will be at risk of explosion.
NOTE
batteries capacity /
Charging time
Internal resistance /
Charging current
Batteries power
percentage
Charging
voltage
batteries type /
Charging mode
