Note: Long bolts (A) will hold seat brace in Step 10
Step 2) Chain Installation & Adjustment of F.W. Unit
A.
Unsnap chain, thread chain around chainwheel and freewheel. Recon-
nect chain with two-piece connecting link.
B.
Slowly pull rear unit towards end of trike until chain slack is taken up.
C.
Tighten the two short carriage bolts. (A) (Fig. 2)
D.
Turn chainwheel and see if chain runs smoothly with no binding or
excessive noise. If not, loosen bolts, move unit slightly forward. Tighten
bolts and check chain function again.
E.
Make sure the chain runs straight and true with the chainwheel.
F.
If chain now runs O.K. tighten all four carriage bolts (A & B) securely,
taking care that the unit does not shift. (Torque 300 to 400 in.lbs.)
G.
Now install chainguard using two screws (C) provided. Make sure chain
does not rub on chainguard. (Fig. 3)
(Fig. 2)
(Fig. 3)
A
B
A
B
C
C
9
ev3man99.qxd 6/22/99 1:21 PM Page 9
