Prodomus
11
Assembling the mesh grill:
Unscrew the grill nut (4) and place the rear grill (5) onto the front motor cover (8). The small,
oval holes in the middle of the rear grill must be attached fittingly onto the pins at the motor
cover. Screw on the grill nut (4) in a clockwise direction to firm the rear grill (5). Please note
that the hole for the small screw must be in the bottom of the rear grill then.
Place the fan blade (3) onto the motor shaft (7), making sure to align the shaft bolt (6) into
the fan slots (2 slots).
Screw on the Blade Retaining Cover (2) in an anti-clockwise direction.
Place the front grill (1) onto the rear grill (5) , the small guidance must be fitted on top, so
that the hole for the screw is at the bottom of the front grill, matching the hole of the rear grill.
Secure tip lace using the guard retaining clips. And screw on the nut to secure the grills
together.
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
Before connecting to the electricity be sure that the appliance is mounted completely
and all parts are fixed firmly.
Connect the appliance to a grounded mains socket. Be sure to place the appliance closed to
a socket and take care that the cord can never be a tripping hazard.
Operation by pressing the knobs on control-board:
Level 0 = Off
Level 1 = medium speed
Level 2 = high speed
Oscillation (swivel function):
The oscillation knob can be found behind the metal mesh guard on top of the motor block. When
pressing down the oscillation knob during operation, the guard will oscillate (swivel).
When lifting the oscillation knob during operation, oscillation will stop.
The tilt angle of the guard can be changed into different levels. (see picture on the left).
C
C
l
l
e
e
a
a
n
n
i
i
n
n
g
g
a
a
n
n
d
d
m
m
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
Caution danger of electric shock! Never immerse the appliance, cord and plug into water
or any other liquid! Do not clean the appliance wet. Water and liquids intruding can cause
damage and short circuit.
When ever the appliance is to be dusted off or cleaned it is necessary to switch off and pull
the plug.
Never clean the appliance during operation.
Use the appliance in dry rooms only - humidity can cause damage to electrical appliances.
Do not use sharp or scouring detergents. Wipe off the plastic parts with a slightly damp
cloth only.
For storage of the appliance, cover it against dust and store it in a dry place.
D
D
i
i
s
s
p
p
o
o
s
s
a
a
l
l
Please observe the environment! Dispose the packaging according to the local garbage
regulations. Dispose paper and carton separately from plastic bags into the
corresponding containers. If at any time in the future you should need to dispose
of this product please note that waste electrical products should not be disposed
of with household waste. Please recycle where facilities exist. Check with your
