Prodomus
Instruction manual
15
fig. similar
light. The sensitive technique of mea-
surement inside could be damaged.
Keep the appliance away from heat
sources (oven, hearth).
Keep the batteries away from excessive
heat.
Do not overload the appliance, the
weighing cells will be damaged
otherwise. The maximum capacity of
5000 g may not be exceeded.
Do not put anything else than weighing
material on the appliance.
Keep the appliance away from
extreme elctro-magnetique influence as
e. g. mobile phone etc. as this might
cause malfunction and wrong indication.
In case of having disposed the
appliance any strong interference and
there is malfunction, switch off and on
again, to solve the problem.
Remove all batteries from the appliance
if used up or while the appliance is not
in use for longer time. This avoids
damage caused by leakage of batteries.
Always ensure that the batteries are
installed according to polarity (+/-).
Always change all batteries.
Do not use different type or kind of
battery.
Clean the contacts of battery and
appliance if necessary before installing.
Never use sharp detergent or metallic
sharp edged for cleaning sensitive
surface.
Before the first use
Remove all packaging material such
as carton and foils.
Remove the transparent foil at the
batteries inside the battery
compartment in order to activate
the batteries.
Clean the housing with a slightly
damp cloth before use.
Special notes and tips
The kitchen scale weighs from
1 to 5000 g. Do not weigh more.
Otherwise the kitchen scale gets
damaged.
Do not put anything else than the
weighing material on the scale.
To get best weighing performance,
always put the weighing material
centered onto the kitchen scale.
High precision electronic weighing
device is inside the appliance.
Therefore never expose it to
extremely high pressure, high
temperature and protect it from
falling down, to avoid damage.
Using the kitchen scale
Put the kitchen scale on a flat, dry
and stable working place and ensure
that it is steady. Keep the scale
empty before switching on.
To switch on just
press the on/off
switch one time
(Tare/on/off,
s. fig.). Zero (0) digit and the
unit g (gram) appear automatically.
Put the material to weigh centered
on the scale.
