Mi SCWXCQ02ZHM Скачать руководство пользователя страница 7

Страница: 7 / 8

Note: It is recommended to clean the electric mite brush after each use.

3. Stand the brush head upright in a well-ventilated area for at
least 24 hours until it is fully dry.

2. After unlocking the brush head, remove it from the electric mite
brush, then rinse and clean the brush head.

Clean the Electric Mite Brush

1. Use a coin as illustrated to rotate the lock counterclockwise until you
hear a click.

4. Once the soft roller brushbar is dry, reinstall it by following the
disassembly steps in reverse.

Note: Fully dry the filter (at least 24 hours) before reinstalling it.

Cleaning the Soft Roller Brushbar and Electric Mite

Brush

Clean the Soft Roller Brushbar

Cleaning the HEPA Filter Assembly

1. Place the vacuum securely on a flat surface, then turn the HEPA filter

assembly cover in the direction indicated and remove the HEPA filter

assembly.

Note:
Remove the built-in foam pad before cleaning the HEPA filter assembly. Rinse the HEPA filter and

2. Rinse the HEPA filter and foam pad with water. To thoroughly

remove all dust caught in the filter, rotate the HEPA filter by 360

degrees while rinsing. Lightly tap the filter against a sink several times

to remove any excess debris. Keep the HEPA filter in a well-ventilated

and cool place to fully dry.

1. Push the brushbar head release button in the direction of the arrow

until the cover of the brushbar head pops to open, then remove the

brushbar head by lifting it in the direction indicated.
2. After you have finished cleaning soft roller brushbar, reinsert it by

following the disassembly steps in reverse.

Note:
To prevent injury from accidentally turning on the vacuum, make sure the soft roller brushbar or

electric mite brush is detached from the vacuum before removing the head. The mite brush and soft

roller brushbar contain electrical components, and the soft roller brushbar head also contains

bearings. Do not wash these parts with water. Be careful of sharp objects when removing debris

caught in the heads of mite brush and soft roller brushbar.

Care & Maintenance

24h

Содержание SCWXCQ02ZHM








