02
This version is for private use only and should not be distributed.
This version is for private use only and should not be distributed.
2. Insert the two plastic anchors into the holes on the wall.
3. Make sure to position the base unit so that the arrow is
pointing up. Secure the base unit in place by tightening
the screws into the plastic anchors.
4. Match the grooves on the bottom of the camera unit with
the raised area on the base unit. Press down until the two
surfaces are flush, then turn the camera unit in either
direction to lock it in position.
Warning:
To avoid any damages or injuries, the device must be securely fastened to the floor/wall as
specified in the installation instructions.
When mounting the security camera on a wall:
please note that the wall must be able to support at least triple the product's total weight.
