Input Voltage: DC12V~24V
Output: 6A/Channel
Working Temp.: -10~40°C
Control Distance: 100m (open area)
Total Output: Max 12A
RGB+CCT LED Controller (Zigbee 3.0)
Model No.: FUT039Z
Made in China
Controller can not
use in humid area
1. Connect with power supply.
2. Turn on/off light continuously over 3 times or press "
SET
" 3
times continuously, confirm the light with red color in
breathe ambience.
3. Open
[ MiBoxer Smart ]
APP and add sub-device ( see
following screenshot).
4. You can dim light,group control and ambience control after
adding device completely
.
How to control the light via phone APP?
Please add zigbee 3.0 gateway to [ MiBoxer Smart ] APP firstly
1. Connect with power supply.
2. Ensure the light is always on ( please wait 5 seconds and turn
off, turn on again 1 time if the light is in breathe ambience).
3
.
Long press group control
" "
button with 3 seconds untill the
indicator of remote flash quickly ( check details in remote
instruction).
4. Please keep closerfor remote and the light which you want to
connect ( within 1 meter).
5. Matching is done if the light breathe 3 times.
1. Connect with power supply.
2. Ensure the light is always on.
3. Long press group control " " button with 3 seconds untill the
indicator of remote flash slowly ( check details in remote
instruction).
4. Please keep closerfor remote and the light which you want to
connect ( within 1 meter).
5. Dismatching is done if the light breathe 3 times.
Match and Dismatch with zigbee remote
Instruction of Matching
Instruction of Dismatching
stay closer distance between the gateway and remote
Please repeat above steps if you are failed
Remote
The remote doesn't pair
with zigbee gateway
The remote paired with
Zigbee gateway
Support match and dismatch light
Only support match and
dismatch light which
connected with same gateway
Light
Attention
Input: DC12V/24V
V- V+
SET
V+
R
G
B
CW
OUTPUT
WW
Model No.: FUT039Z
Input Voltage: DC12V~24V
Output: 6A/Channel
Total Output: Max 12A
Working Temp.: -10~40°C
Control Distance: 100m (open area)
RGB+CCT LED Controller (Zigbee 3.0)
Press
SET
3 times
continuously to
pair zigbee network
Made in China
Dim brightness
Product follow Zigbee 3.0
standard protocol
Zigbee 3.0
Zigbee remote control
Support third party voice control
(Zigbee 3.0 gateway is needed)
Smartphone APP control
(Zigbee 3.0 gateway is needed)
16 Millions of
colors to choose
Color temperature
adjustable
V+
B
G
R
WW
CW
Warning
1. Please check whether the voltage of the power supply is in
accordance with the controller, and please check the connection of
both the cathode and anode, otherwise the controller will be broken.
2. Please don’t connect wires with power on. Please turn on again only
when it is in right connection and no short circuit.
3. Please do not use the controller in the place with widely range metal
area or strong electromagnetic wave nearby, otherwise, the remote
distance will be seriously affected .
1. Remote only match or dismatch with one light in one time, it will
match or dismatch with the nearest light since the light identify
light by nearest signal.
2. Remote doesn't pair with gateway: one lampe is only controlled
by one remote.
3. Lamp doesn't pair with gateway: it can not be controlled by
remote which already paired with gateway.
4. One light can be controlled by many remotes if remote and
light both connected with gateway.
（
the max quantity for
remote and light is based on max gateway which is connected).
