Mi-Heat MI-FH-51110, Руководство пользователя

Страница: 9 / 12

9
•
The appliance must never be used after a malfunction, or if the appliance has been dropped
into water or damaged in any other way.
•
The manufacturer accepts no responsibility whatsoever in the event of incorrect use resulting
from failure to observe the instructions for use.
•
Technical changes and errors excepted!
Usage:
Set up:
IMPORTANT!
Please note that the heating panel can only
be switched on when it has been
positioned as shown in the illustration
below.
The integrated anti-tilt switch prevents the
heating panel from being switched on if it
is lying down or has not been placed
vertically.
Switch on / off :
•
Plug the Euro mains plug into a suitable socket.
•
All LEDs light up once briefly
•
The heating panel is now ready for operation.
•
Press the power button to switch on the heating panel. After switching on, the Power and
High LEDs light up.
•
To switch off the heating panel, press the power button again. It is recommended to
disconnect the mains plug after use.
NOTE: Before folding and stowing the heating panel, it must be completely cooled down!
Set the heating level/temperature:
The desired heating level or temperature can be set using the
▲
or
▼
key. Three heating levels are
available (High approx. 60°C / Mid approx. 45°C /Low approx. 40°C). Depending on the selected heating
level, the corresponding LED lights up.