8
Install one end cap first, followed by the center shaft handle,
then enclose it by securing the second end cap.
Attaching the Handle
•
Attach the first end cap to the grill lid using a 1/4-20 x 1-1/2"
Hex Bolt and Kep Nut making sure that the Graphite Gasket
(purple element) is positioned between the end cap and
the grill lid as shown.
•
Tighten the end cap by using two 7/16" Combination Wrenches—
one to hold the bolt head and one to tighten the Kep Nut.
•
Insert the handle into both the installed end cap and second
end cap
•
Installl the second end cap using the same method
as outlined above.
ATTACHING THE FRONT HANDLE
STEP 6
HANDLE
END CAP ASSEMBLY (2)
Each End Cap Includes:
• End Cap
• Graphite Gasket
• 1/4-20 x 1-1/2" Hex Bolt
• Kep Nut
PARTS INCLUDED IN BOX:
END CAPS/HANDLE
Includes hardware
Installing the Temperature Gauge
•
Insert the temperature gauge through
one washer into the pre-drilled hole
on the grill top casting making sure
the gauge is facing outward.
•
On the inside of the grill lid, install
the second washer, then the Wing Nut
to the temperature gauge post.
•
Hand tighthen the Wing Nut until
temperature gauge is snug against
the casting.
INSTALLING THE TEMPERATURE GAUGE
STEP 7
TEMPERATURE GAUGE ASSEMBLY
Includes:
• Temperature Gauge
• Washer (2)
• Wing Nut
PARTS NEEDED:
OWNER'S MANUAL BAG
The Temperature Gauge
is included in the
Owner's Manual bag
TEMPERATURE
GAUGE
PRE-DRILLED HOLE FOR
TEMPERATURE GAUGE
END CAPS
GRAPHITE GASKETS
WASHER
WING NUT
WASHER
TOOLS NEEDED:
7/16" COMBINATION
WRENCH (2)
