Table 204 -Guidance and manufacturer’s declaration-electromagnetic immunity -for AES-U181, as
followling table.
Table 206 Recommended separation distances between portable and mobile RF communications
equipment and AES-U181, as followling table.
Table 201
Guidance and manufacturer’s declaration – electromagnetic emissions
The AES-U181 is intended for use in the electromagnetic environment specified below. The customer
or the user of the AES-U181 should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The AES-U181 uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
The AES-U181 is suitable for use in all establishments,
including domestic establishments.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations
/flicker emissions
IEC 61000-3-3
Not applicable
Table 202
Guidance and manufacturer’s declaration – electromagnetic immunity
The AES-U181 is intended for use in the electromagnetic environment specified below.
The customer or the user of the AES-U181 should assure that it is used in such an environment.
Immunity test
IEC 60601 test level
Compliance level
Electromagnetic environment –
guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
± (2, 4, 6) kV contact
± (2, 4, 8) kV air
± (2, 4, 6) kV contact
± (2, 4, 8) kV air
Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the relative
humidity should be at least
30 %
