Stockholm
2
Balanced
Realistic yet Natural Sounding DAC
Mhdt Laboratory
Taipei, Taiwan
http://www.mhdtlab.com/
Rev 1 Mar., 2015
5
9 AES/EBU Professional Digital Input / 110
Ω
- Connect to CD Transport, CDP
or DVD Digital output. Capable of 16-24bits, 32-192kHz SPDIF digital
signals.
10 Main Powercord Inlet – Check the preset voltage indicated below this slot,
this can be either 220-240VAC or 100-120 VAC (50/60Hz).
The 4 analog outputs, i.e., 1,2,3,4 are output simultaneously., ie, 1
and gnd and 2 and – simultaneously, and so as 3,4 in left channel.
The 5 digital inputs, i.e., 5,6,7,8,9 are independent to each other, only one
among them will be active and is controlled by the tact switches located in front
panel.
2.3 Powering up
Before applying power to the
Stockholm
2
Balanced
DAC, ensure that the
correct mains voltage is used. This can be either 220-240VAC or 100-120 VAC
(50/60Hz). The factory preset voltage is indicated on the rear panel.
After applying mains voltage, a blue led on all inputs will sequentially light up
and stay on the last input when powered off.
The filaments of vacuum tube located in the right side of the DAC will also slowly
lighting up, it is visible through the transparent acrylic front panel. A slightly
click sound of relay can be heard in about 15 seconds after power on and it
represents that the DAC is in stand-by mode.
3. Technical specifications
Digital Receiver CS8416
D/A converter PCM56 (J-Grade)
Frequency response: 20 Hz to 20 kHz (± 2dB)
Output impedance: 32 ohms
