`~å~êó=
Realistic yet Natural Sounding DAC
Mhdt Laboratory
Taipei, Taiwan
http://www.mhdtlab.com/
Rev 1.0 Jun, 2016
12
The input AC Voltage is presented according to your country and is marked in
the rear panel.
In case of traveling to different voltage area:
Find JP3 (Voltage selection jumper) on the PCB beside IEC AC socket.
The DAC is designed to be fully regulated in circuit. So, select 110-120V case
can also works well in Japan’s 100V.
8. Troubleshooting
In case there is no audio coming out of your system, there are a few things to
check:
z
`~å~êó
DAC accepts USB audio signal via USB port. Be sure the input is
USB audio signal.
z
Canary DAC accepts only SPDIF (PCM) format digital signal for the rest of
inputs; BNC, RCA and Toslink. Other format like dts, ac3… is not
accepted.
z
Are both sides of filaments of the vacuum lighting? If not, try to firm the
tube or the tube is dead. Changing a new tube to check the problem
remains.
z
Canary DAC doest not need to install additional USB driver. However, in
