Performing Your Test, Cont.
Performing Your Test, Cont.
22
23
Step 3
The EasyTouch® HealthPro™ Meter only requires 0.5 µL sample volume.
•
Place the edge of the test strip to the drop of blood.
•
The blood will automatically be drawn into the test strip channel.
•
When the test strip has collected a large enough blood sample the meter will
automatically count down.
•
After the beeping sound, the test will begin automatically and your results
will appear in 5 seconds. It should begin counting down from 5 to 1 second
on the LCD display window. The LCD window will display the result of your
blood glucose level, temperature and time.
•
Record the result value in your logbook. When the glucose test strip is
removed, the glucose test meter turns off automatically.
CAUTION:
1. If the countdown does not start, do not add more blood to the glucose
test strip. Discard the glucose test strip and start over with a new strip.
2. If you do not conduct the test within 5 minutes, the glucose test meter
will automatically power off to save battery life. In this case the test
procedure should start again from the beginning.
3. You may get an inaccurate result if the blood sample does not
completely fill the test strip channel.
CAUTION:
1. If the test result is out of the test range, the Hi/Lo message will be shown
on the LCD. Please contact your healthcare provider immediately if there
is a Hi/Lo result.
2. Please contact your healthcare provider for instructions on disposing
glucose test strips and lancets.
Step 4
Correct
Incorrect
