MH RYZ 50 Cross C, Руководство по обслуживанию

Страница: 31 / 92

RYZ
CHASSIS 4-9
4
Check the chain tension.
SEAT
REMOVAL
Remove the plug (1) on the inside of the rear skirting.
Remove the seat nut through the hole in the rear skirting, and
pull the seat (2) backwards to separate it from the chassis.
Remove the seat.
FUEL TANK
REMOVING THE FUEL TANK OR FUEL TAP
Remove the seat – see “Removing the seat” in this section.
Remove the bolts (1) from the radiator fairings.
Remove the bolts (2) from the fuel tank.
Lift up the tank to disconnect the fuel level indicator connector
(2), the fuel supply pipe (3) and the fuel tap vacuum outlet (4).
Remove the tank.
5)
1)
2)
3)
1)
2)
3)
4)
5)
CAUTION:
A chain that is too tight causes rapid wear of the gearbox
output shaft, the rear wheel bearings, the chain and the
sprockets.