MH RYZ 50 Cross C, Руководство по обслуживанию

Страница: 28 / 92

RYZ
ASSEMBLY
Fit a new seal (1), lightly lubricated, using a seal pusher.
Refi t the seal circlip (2).
Insert the fork tube into the fork arm with the end of compres-
sion cone (3) and its washer (4), taking care not to bend over
the seal lip.
Fit a new seal and tighten the drain screw.
Drain screw tightness torque:
2.3 daN•m (23 N•m)
Fit a new dust guard, lightly lubricated.
Pour in 0.3 litres of SAE 15 (Esso Univis N46) type hydraulic
fl uid into the fork tube.
Hydraulic fl uid for forks:
SAE 15 (Esso Univis N 6) type
Refi t the spring (5) with the tighter coils upwards.
Refi t the spacer (6).
Refi t the fork tube plug (7).
Tube tightness torque:
2 daN•m (20 N•m)
1)
2)
3)
4)
5)
6)
7)
8)
9)
4-6 CHASSIS
WARNING:
Check the condition of the fork tube: there should not be
any signs of corrosion or impacts, and should be perfec-
tly straight and clean.
4