Assemble Legs
Note: The larger of the two metal tubes is the upper leg of the assembly. The upper
leg will have a hole that is 25.125 inches from one end of the leg. This end is the
“bottom” of the upper leg portion.
The
(#4) lower leg
(smaller diameter tube) is inserted into the
“bottom”
of the
(#5) upper leg
.
Insert
(#4) lower leg
into
(#5) upper leg
and secure with
(H)
Wire Lock Pin
through the lowest bottom hole.
Repeat process for two remaining legs.
Attach legs to top collar
Note: Make sure all three bolt heads are on the
right hand side of collar shoulders.
Attach
(#5) upper legs
to
(#1) top collar
. This is
best accomplished by having the tripod legs in a
horizontal position laying down.
Attach each leg with
(C) 1/4 x 2-1/4
long screw in the
following manner:
Place
(F) nylon spacer
on
(C) 1/4 x 2-1/4
long screw.
Insert screw through right side of one of the
(#1) top collar
attachment points, through
the
(#5) upper leg
, and through the other side of
(#1) top collar
leg attachment point.
Add
(F) nylon spacer
then
(E) lock nut
. (You will only use two nylon spacers in this
portion of assembly.)
Assembly Sequence: Assembled
Содержание MK-2-EXT
Страница 1: ...TRIPOD MAST MOUNT...
Страница 3: ......
