Blaze INFO-2 Operating Manual
Page 13
4.4 Time Setup
Set UTC Time:
This function is used to set the internal real time clock. The time to be entered must be
UTC in order for the system to operate correctly. Do not enter local time (unless it is the
same as UTC).
UTC is the same as Greenwich Mean Time (GMT) or Zulu time.
UTC Offset:
Enter the UTC offset for your location. The UTC offset can be adjust in half an hour increments.
UTC Display:
Select to enable or disable the UTC display.
SW Display:
Select to enable or disable the stop watch display.
TMR Display:
Select to enable or disable the countdown timer display.
ALM Display:
Select to enable or disable the alarm display.
RTC Trim:
This allows you to adjust a trimming factor that will increase the accuracy of the built in clock.
