10
6.
Attaching / Removing Wheels
If your buggy comes with the wheels off, they should be placed in position prior to unfolding. To
put the wheels on you will need to align the four slots on the inside of the wheel with the same
four on the drive dog on the axle. To engage the rear wheel, depress the quick release catch until
the wheel is in place.
NVR750c Buggy
Your NVR750c buggy uses a gear system, whereby the two rear drive wheels do not free wheel.
The motor needs to be running for the buggy to move. Drive will only occur when the speed
control is turned on.
If for some reason your buggy stops operating during your golf round, your buggy can free wheel.
Simply depress the quick release tag and at the same time move the wheel outwards about
10mm from its current position. Release the tag and allow the wheel to click into its outer
position. By doing this, you have disconnected the wheels from the drive and they can rotate
freely.
Align the four slots on the wheel with
those on the drive dog teeth.
Depress the quick release catch,
whilst putting wheel in position on
the axle
