5
Turn on The training collar and the transmitter. Select the channel which you encoded the
collar with (1 or 2)
Press the Mode Button to choose
V
or
S
mode as you require
For V Mode
– vibration mode – there are 9 intensity levels. Please use Up/Down button to adjust
them.
For S Mode
–
Static Mode
– there are 9 intensity levels. Please use Up/Down button to adjust
them.
Press Transmitter button
Y
to send the signal to the collar receiver.
Operation between Remote transmitter and the Remote Beeper
Before use, please make sure you have encoded the Remote Transmitter with the Remote
Beeper and also choose the right channel.
Turn on/off the Remote Transmitter and the Training Collar (please refer to brief introduction on
‘How to set the Remote Beeper to work with a Remote Transmitter’).
Press the Mode Button to choose
R, T
or
L
mode as you need and then press Transmitter button to
send the confirmation signal to the Remote Beeper.
For R Mode:
There are 3 Running Modes. You have three choices of how often the beeper
sounds off when your dog is moving.
Silence Mode:
The Beeper will keep Silent when the dog moves and when it stops it will beep
every 2 seconds.
5 Second Mode:
The Beeper will beep every 5 seconds when the dog moves and when it stops it
will beep every 2 seconds.
10 Second Mode:
The Beeper will beep every 10 seconds when the dog moves and when it stops
it will beep every 2 seconds.
For L Mode:
The Location Mode will disable the Remote Beeper Functions. In this Mode you can
press the Transmitter Button to send a signal to the Remote Beeper and the Remote Beeper will
play a sound to help you locate your dog.
For T Mode:
The Tone Mode can adjust to 9 different Tone sounds.
You can alter the Remote Beeper to different tone sounds any time you like. Please press Mode
button to change to the Tone Mode. Use the Up/Down button to change to your preferred tone
sound. Once decided, press Transmitter button Y to send the confirmation signal to the Remote
Beeper.
