I
I
ntroduction
ntroduction
This manual, supplied with the machine, provides important instructions for the correct installation, use and maintenance
of the machine.
Reading this manual and complying with the provisions contained therein are necessary conditions for the
validity of the warranty and for the correct and safe operation of the system.
It is the responsibility of the customer to keep this manual, to provide adequate instructions to any user for
the correct use of the system.
The manual is available for download in its latest update at www.mgftools.com
The manufacturer declines all responsibilities for damage caused by negligence and failure to observe the
rules described in this manual.
Purpose of use
Purpose of use
This pump has been engineered for small transplanting and fillings and for plants test with water. The pump can work with
all kind of liquid with a maximum viscosity of 1.5 m Pa s and with water solutions with PH between 7 and 12.
MGF
MGF
refuses every responsibility for damages or bad working if the pump is used incorrectly, for a purpose for which it
was not intended or is tampered.
General Informations
General Informations
Art.
Modello
905200
PRESS Testing Pump 60 bar 230V
905250
PRESS Testing Pump 60 bar 115V
300020*
Unclogging pipe
*Additional accessory not supplied as standard
STANDARD SUPPLY
•
MGF
MGF
Press Test pump
•
1/2" high pressure hose (art.300002)
•
Suction hose with fitting and filter (art. 960002)
•
Use and maintenance manual
2
MGF
MGF
srl –– Via Chico Mendes, 8 – 43055 Mezzani (PR) ITALY –
Tel. +39 0521-818301 – Fax +39 0521-818202
E-mail:
– Web:
www.mgftools.com
–
www.nebulizzare.com
TECHNICAL CHARACTERISTICS:
Weight:
13,2 Kg
Dimensions:
200 x 440 x 320 mm
Max. Pressure:
60 bar
Max. Flow Rate:
7 L/min (420L/h)
High pressure hose:
1/2” G F - 1500mm
Voltage:
230 V ~ 50Hz / 115 V ~ 60Hz
Power:
1750W
Service class:
S1
Insulation class:
IPX5