34002025EN/AA
- Page 3
1. Installation of cabinet
◗
the circuit-breaker cabinet must be located
as close to the battery as possible,
◗
the cabinet is fixed to a vertical wall by
means of 4 screws of diameter 8 using the
fastening lugs placed in the vertical or
horizontal position,
◗
the cabinet door is closed by two lock knobs
with a key (405 type) on one of the knobs, see
fig. 1,
◗
the cabinet version with insulation controller
has the same characteristics as the standard
version (except for dimensions), with the
insulation controller being located in the
upper part of the cabinet door,
◗
cables are fed through the bottom of the
cabinet via a 315 x 90 mm opening for a 400
mm or 600 mm wide cabinet.
P
24
I
M
J
H
L
K
