Page 16 -
34003602EN/AB
2. Installation
2.4 Recommendations
To ensure continuous remote monitoring of your equipment, the unit must remain permanently connected to the telephone
network once installed. Regular checks should be made to ensure that it is working properly via the indicator light on the
front of the card or external unit (see section 1.5 "Indicator lights").
When working on your installation, always disconnect the telephone line to avoid any unwanted alarms being sent to the
Teleservice centre.
2.5 Fitting the warning label
A set of yellow warning labels is provided in the
PowerServices TelPac
kit.
This label is designed to warn MGE UPS SYSTEMS field technicians that the equipment is being remotely monitored and
that work on equipment connected to
PowerServices TelPac
must only be performed once the telephone line has been
disconnected.
In the case of "Single-unit" remote monitoring (one product), the label is placed on this unit, near the control buttons (see
illustration).
In the case of "Multi-unit" remote monitoring (several products), the labels are placed near the control buttons on each
product .
All manuals and user guides at all-guides.com
all-guides.com
