LT-6015 Rev. 1
May 2012 Page 2 of 2
Wiring
Connect the white and orange wires to the terminal block above the transformer labelled for the orientation of the wires.
The two brown wires from the transformer are connected to the bottom right connector and the top left connector of the
bridge rectifier.
The four power wires from the transformer are connected to the AC terminals (bottom side). The green wire is connnected
to the GND terminal, the black wire is neutral and connected to the N terminal, the red wire is 120V AC and the yellow wire
is 240V AC. Once wiring is complete, place metal cover over transformer and fasten with two #8 hex nuts.
Orange-White-Orange
Wires connected from
the transformer
to this terminal block
Connected to Batteries
Battery Fuse F1
32V, 40A MAX
Fast-acting
Battery
Disconnect
Board
AC Power IN
G N 120VAC or 240VAC
Wire as per label.
Orange-White-Orange
Wires from the Amplifier
backplane (soldered on
board) are wired
to this terminal
block
Red (positive) and Black (negative) wires
from the Amplifier backplane (soldered
on board) are connected to lug terminals
on the Battery Disconnect board
Two brown wires
connected from the
transformer to the
bridge rectifier.
Green (GND), black (N), red (120V AC)
and yellow (240V AC) wires connected
from the transformer to the AC Input
Terminals.
-
-
-
-
-
+
+
+
+
+