8
IMPORTANT INFORMATION
Please keep this manual as it contains important information.
www.smooshins.com
© 2017 MGA Entertainment, Inc.
SMOOSHINS™
is a trademark of MGA in the
U.S. and other countries. All logos, names,
characters, likenesses, images, slogans, and
packaging appearance are the property of
MGA.
16300 Roscoe Blvd.
Van Nuys, CA 91406 U.S.A.
(800) 222-4685
Printed in China
MGA Entertainment UK Ltd.
50 Presley Way
Crownhill
Milton Keynes, MK8 0ES
Bucks, UK
+ 0800 521 558
Visit
.com
to register your product
and to enter our sweepstakes
(No purchase necessary)
0617-1-E/INT
CLEANING
2
1
Use a dry paper towel to wipe out excess
material from the mold. If mixture remains, use
a damp cloth and dry thoroughly before
starting a new character.
Make sure the vent holes are cleaned out
and clear.
CAUTION
CLEANING THE MOLD
• DO NOT puncture the color pouch or intentionally expose the contents in the pouch unless it is going into the mold.
• Keep away from pets and sharp objects to avoid puncturing the pouch.
• DO NOT eat the contents of the pouch.
• DO NOT eat near the play area.
• Wash hands thoroughly with soap and water after playing or if product gets on your hands.
• Keep the color pouch away from clothing and furniture to prevent staining. Color transfer may occur.
• Keep pouch away from heat.
• Some pouches might be harder to pop than others. Avoid using excessive force to pop the inner color.
• DO NOT pop the color on a fragile surface such as a glass table.
• DO NOT step on or do anything that might damage the pouch.
• Mixing is crucial and will take practice to properly mix. A fully mixed pouch should have no remaining clear portion and be
mixed under 1 minute and 30 seconds.
• The valve inside of the color pouch will only open if it is inserted properly into the surprise maker.
• Avoid touching the mixture, and keep it away from your eyes and face.
• Do not open mold at anytime while character is growing inside the surprise maker.
• Wait overnight before removing your character from the mold.
• Be gentle when removing a character from the mold to prevent tearing.
• Use a paper towel to dry off the character if mixture is still wet.
• Do not wash the mold with water. If a paper towel doesn’t remove the color, leave it overnight and peel off excess color or
use a damp cloth.
• Use your squeeze tool to remove any mixture stuck to the top opening of the mold.
• Keep pouch at room temperature.
TROUBLESHOOTING
Character came out gooey
•
Make sure the color and clear portions in the pouch are completely
mixed (see page 3).
• Leave character inside the mold overnight.
Color hardened inside pouch
•
Make sure to mix well within 1 minute and 30 seconds. Then, quickly
squeeze the color into the surprise maker.
•
Make sure to squeeze the color into the surprise maker within 30 seconds.
• Squeeze as much color into the surprise maker as possible.
• Leave character inside the mold overnight.
Color didn’t fill the mold
