ASSEMBLE THE 2-IN-1 TURTLE SANDBOX & POOL
Remove the post from
under the turtle’s sunshade/lid.
Attach the shorter post to the
connector on the longer post.
PLAYING IN THE SAND
PLAYING IN THE POOL
CLEANING
1
2
Insert one end of the post into the larger
opening on the turtle.
Insert the other end of the post into the larger
opening on the sunshade/lid. Then, attach the
flower sprinkler in the center of the turtle.
3
4
• Cover the play area before beginning.
• Tear open the moldable sand packets and pour the sand into the sandbox. Dispose the packets.
• Keep water away from the sand.
• Follow the cleaning instructions after playing.
• Before beginning, cover the play area to protect from possible water damage.
• Make sure to remove the sand before pouring the water.
• Follow the cleaning instructions after playing.
SAND MOLDS
SAND CASTLES
Flip over the mold and pour the sand into the mold.
Compress the sand. Then, flip over the mold
and shake it a little to release the sand.
Move the handle out of the way and remove the lid.
Pour sand into the bucket and compress the sand.
Flip over the bucket and shake it to release the sand.
2
3
Fill the turtle halfway with water. Do not overfill.
Then, allow the water to seep into the floor panel
for a minute or two.
Gently and slowly press down the starfish on the turtle
a couple of times to activate the flower sprinkler.
1
2
3
Squeeze the squirting fish and dip in water.
Then, release the pressure on the fish to fill
it with water. Squeeze again to squirt out the water.
Make it a beach day with
Sand & Sun Lilly, Ami or Tommy
.
(DOLLS SOLD SEPARATELY.)
1. Pour out the water or sand from the sandbox/pool. Store the sand.
2. Remove the floor panel (Fig. 1). Wipe off any remaining water or sand from the sandbox/pool and panel.
3. Replace the floor panel, making sure to insert the opening into the peg on the turtle (Fig. 2).
FIG. 1
FIG. 2
