1. Attach the connectors to the sprinkler hub and to each other in any
configuration or fun formation that you would like!
2. With the hose turned on and adjusted to the desired stream height, the
sprinkler will randomly spray water through the various openings on the
connector pieces and sprinkler hub!
TIP: If water is spraying out of the release valve (Fig. 1), the water pressure from your garden
hose may be too high. For optimal performance, turn down the water on your garden hose
until little or no water is coming out of the release valve.
3. Play games by trying to avoid the streams of water, or by seeing who can
catch the most sprays!
ASSEMBLY
LET’S PLAY
1
2
3
4
TRY THESE CONFIGURATIONS:
DANCING SPRINKLER FUN!
2
3
Twist off the plastic hose connection nut
from the sprinkler hub.
Twist the plastic hose connection nut back
onto the sprinkler hub.
To remove a connector and change the configuration, pull back on the
sleeve where the pieces connect, and pull the connector out (Fig. 2).
Begin attaching the connectors in the four
ports around the sprinkler hub.
Tuck the hose connection under one connector.
Connect the hose connection to your own garden
hose (not included). Then, turn on your garden hose.
Slide the nut over the hose connection, and
attach the hose connection to the sprinkler hub.
Fig. 1
6
5
Fig. 2
1
2
Outside U.S.A. and Canada:
Before connecting a garden hose, screw the
adaptor into the connector (6a).
