3
14
WALL MOUNTING ASSEMBLY
• For added safety and stability, install the wall mounting hardware.
• Always use wall anchors appropriate to your wall type, like plaster, drywall, concrete, etc.
• When possible, mount to wood studs.
• Consult a qualified professional for mounting.
• DO NOT install on a wall where items can fall off and injure a child.
• CHOKING HAZARD: Unassembled parts may be a choking hazard to children 3 years and younger.
• Adult assembly required. Hardware contains small screws with sharp points. Keep unassembled parts out of reach of small children.
• Serious or fatal injuries can occur from furniture tipping over. To prevent the product from tipping:
• Use mounting hardware to secure the house to a wall. This will reduce, but NOT eliminate, the risk of tipping over.
• DO NOT allow children to climb on the house.
• Keep remote controls, toys, and other items that might attract children away from this product.
• DO NOT place heavy items, like televisions, on top of this product.
1
2
Attach the plastic strip to the back of the
product. There is a pre-drilled hole on the
house’s backboard (O).
• Use a 1/4” (6.5 mm) drill bit to drill a pilot hole in
the wall.
• DO NOT drill an oversized hole, or the anchor will
not hold tightly to the wall.
• Tap the wall anchor into the hole.
• Secure the house to the wall with a screw (E)
through the plastic strip and into the wall anchor.
NOT INCLUDED
HARDWARE
A. Screw
B. Small Washer x 2
C. Plastic Strip
D. Plastic Anchor
E. Wood Screw
F. Nut
G. Large Washer
H. Wrench
1/4”(6.5mm)
D
G
E
F
B
B
A
C
+
+
CONTENTS
28
29
26
33
34
27
30
31
32
35
36
39
40
37
38
41
42
45
46
43
44
47
48
51
52
49
50
53
54
x 2
x 32
57
58
55
56
59
60
61
62
