36
6 Reset Procedure
The reset procedure allows you to restore default settings of device STE02W in case of
incorrect configuration of network parameters or security system.
This procedure involves the reset of all settings of STE02W and is recommended only in
case it is impossible to access the device in traditional way to reconfigure the main
parameters. To perform this procedure, proceed as follows:
Before working on STE02W hardware, wear an anti-static bracelet or make sure you
download static electricity in your body touching a metallic object discharging the static
accumulated electricity (for example the case of a personal computer).
−
Extract the STE02W motherboard from the cover by removing screws ‘A’ and ‘B’,
removing the back-panel and removing the board with care. PAY ATTENTION,
disconnect device from power supply and remove power connector from STE02W,
remove antenna to facilitate disassembly procedure.
Figure 33: Reset Procedure –STE02W Disassembly.
−
Locate the jumper P1: ‘software reset’. Close the connection by using supplied bridge
and connect STE02W to power supply. PAY ATTENTION: handle disassembled
STE02W taking care to electrostatic discharge and be sure that the working table has
not metallic surface.
Screw ‘A’
Screw ‘B’
Back-Panel
