MG Energy Systems MGRS12S4P176, Руководство пользователя

Страница: 6 / 51

MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | info@mgenergysystems.eu | www.mgenergysystems.eu
Innovation in energy storage
1 GENERAL
Before continuing read the instructions in this chapter carefully and be sure the instructions are fully
understood. If there are questions after reading the instructions please consult MG Energy Systems.
1.1 Document history
Table 1 - Document history
Rev. Date Changes Revision author
2.0 28-01-2019 Initial document. Mark Scholten
2.1 02-04-2019 Minor changes, corrections, and additions in
sections 7.3, 7.5, 7.6, 8.2, 9.1, and chapter 11. Ane Tjitze Rienstra /
Mark Scholten
2.2 27-05-2019 Additions in chapter 10.1. Wilco Portinga
2.3 12-07-2019 Minor changes, corrections. Mark Scholten
2.4 25-11-2019 Revised the complete document. Ane Tjitze Rienstra
2.5 05-12-2019 Minor changes, corrections. Mark Scholten
2.6 07-05-2020 Section 7.6:
- Added minimum volume of PPS tank related to PPS
fluid volume.
- Replaced ‘pressure vessel’ by ‘pressure tank’ for
clarity in maritime related use of the battery.
- Added ‘at least one PPS per battery string’ as
mandatory
Added section 5.1.4 with an explaination of the
battery strategy and available capacity.
Section 8.7
- Added line that it is mandatory to use at least one
PPS per battery string.
Removed section 9.1.3 about servicing the desicant.
Chapter 10:
- Updated and added ratings.
Chapter 11: updated nominal capacity and energy. Ane Tjitze Rienstra
2.7 26-05-2020 Added statements for limiting factors in section 7.5
and 9.2. Ane Tjitze Rienstra
2.8 10-06-2020 - Added and restructured the requirements for off-
gas ventilation ducting in section 7.4.
- Added section 7.6. Ane Tjitze Rienstra
1.2 Terms, abbreviations, and definition
Table 2 - Terms, abbreviations, and definitions
Battery cell Battery cell; the smallest building block in a battery, a chemical unit.
or cell is the bare Lithium-Ion battery cell.
Battery module Battery module; is an assembly of submodules, BMS, fluid cooling
and outer enclosure.
Battery stack Battery stack; is a set of multiple cells in cell cassettes constructed as
one.
BMS Battery Management System; The BMS is the electronics that
monitors the battery cell parameters to keep it within the operation
specifications.
CAN-bus Controller Area Network bus; CAN-bus is a standard serial databus
that provides data communication between two or more devices.