Innovation
in energy storage
MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | [email protected] | www.mgenergysystems.eu
11
TECHNICAL SPECIFICATIONS
Table 25 - Technical specifications
Technical specifications
MGRS12S4P176
44 V / 192 Ah
MGRS14S3P132
51 V / 144 Ah
MGRS16S3P132
58 V / 144 Ah
MGRS24S2P088
88 V / 96 Ah
Technology
Lithium-Ion NMC
Cell configuration
12S4P
14S3P
16S3P
24S2P
Nominal voltage
43.8 V
51.1 V
58.4 V
87.6
Nominal capacity
192 Ah
144 Ah
144 Ah
96 Ah
Nominal energy
8.4 kWh
7.4 kWh
8.4 kWh
8.4 kWh
Weight
75 kg
69 Kg
75 kg
75 kg
Discharge
Discharge cut-off voltage
36.0 V
42.0 V
48.0 V
72.0 V
Recommended discharge current (2C)
1
384 A
288 A
288 A
192 A
Maximum continuous discharge current (3C)
1
500 A
2
432 A
432 A
288 A
Charge
Maximum charge voltage (4.20V per cell)
50.4 V
58.8 V
67.2 V
100.8 V
Recommended charge voltage (4.05V per cell)
48.6 V
56.7 V
64.8 V
97.2 V
Recommended charge current (1C)
1
192 A
144 A
144 A
96 A
Maximum continuous charge current (2C)
1
384 A
288 A
288 A
192 A
Configuration
Series configuration
Yes, up to 900 V
Parallel configuration
Yes, unlimited
Redundant mode
Yes
Using multiple Master BMS’s
Cycle Life
3
80% depth of discharge
> 8000 cycles
Environmental
Recommended operating temperature
+15 to +30 °C
Operating temperature charge
0 to +40 °C
Operating temperature discharge
-30 to +50 °C
Storage temperature (< 50% SoC)
-40 to +60 °C
IP-Protection class
IP65
Thermal management
Liquid cooling/heating
Humidity (non-condensing)
≤ 95 %
Connections
Communication
CAN-bus ( M12 connection)
Power connections
Amphenol PowerLok™ 300
4
/ 500 series
Safety
Batteries are always used in
combination with a MG Master.
Integrated Slave BMS
Passive cell balancing
Redundant BMS
Compatible BMS master
MG Master LV, MG Master HV
Safety features
Interlock circuit in HV and CAN-Bus connectors
Cell level thermal runaway propagation protection
Automatic thermal runaway suppression valve input
Type approval
DNV-GL
5
In accordance with
IEC 62619:2017
IEC 62620:2014
1
Only valid when a proper designed fluid cooling circuit is running.
2
Limited by the maximum continuous current rating of the Amphenol PowerLok™ 500 series with 150 mm
2
cable.
3
End-of-Life is 70% of initial capacity at 25 °C. Charge up to max. 4.05V per cell.
4
Continuous current ratings must be de-rated to ≤ 300 A.
5
Type approval pending.
