6
2.5
Establish WPS Connection
If the terminal connected with the device support WPS (WiFi Protected Setup), it can
be connected without a password.
Steps are as follows:
Step 1: Start up and wait for device work normally.
Step 2: Activate the device’s WPS, and long time press the device’s WPS button for
3 seconds.
Step 3: Activate the client’s WPS, and press the device’s WPS button in 2 minutes.
Tips: Specific operation of devices please refers to customer device’s user instruction.
2.6
Charging Operation
1
）
Charging with adapter
The product is recommended to use the 5V 1A adapter, and then it shall be
charged fully in 2-3 hours.
2
）
Charging by connecting to the computer
Please connect to the computer with the standard USB cable.
Attention:
1
、
The charging environment temperature shall be at 0
℃
~45
℃
, please keep the device in
this temperature when it is charging.
2
、
The product experienced circulatory charge and discharge several times after it has
been normally used for one year, it will have about 20% loss of electricity. If you need
replacement, please contact with the local after-sales service.
3.
Software Instructions
3.1
WEB Management Interface Login
1
）
Open Internet Explorer, and enter http://192.168.0.1.
2
）
Enter user name: admin password: admin in the login interface to enter the
management interface.
