MFJ MFJ-993, Инструкция по эксплуатации

Страница: 17 / 36

MFJ-993 IntelliTuner Automatic Antenna Tuner Instruction Manual
©
2003-2004 MFJ Enterprises, Inc.
11
MODE BUTTON FLOW CHART
SETUP MODES MAIN MODES
For 2 sec.
MODE
For 2 sec.
MODE
TARGET SWR
AUTO TUNE SWR
METER RANGE
MEMORY
IntelliTune
SWR BEEP
BEEP
PEAK HOLD
REFRESH
LC LIMIT
MODE
MODE
MODE
+
+
C-UP
L-UP
TUNE C-UP
L-UP TUNE
TUNE L-DN
TUNE C-DN
C-DN L-DN
L-DN L-UP
C-UP C-DN
Press + to switch the capacitor between the input and output side.
Press + to toggle the SWR Beep on and off.
Press + to bypass the antenna tuner.
Press + to cycle the Auto Tune SWR among 0.5, 1.0 and 1.5 above the target SWR.
Press + to toggle the Target SWR between 1.5 and 2.0.
Press + to toggle the Auto Range on and off.
Press + to toggle the Meter Range between 300 and 30 watts (disable Auto Range).
BUTTON ACTION
Press + to increase both capacitance and inductance.
C-UP L-UP
MODE
AUTO
ANT
C-UP
L-UP
C-DN
L-DN
TUNE
POWER
Press less than 0.5 second to bypass the tuner; press and hold for 0.5 to 2 seconds to start the
tuning process; press and hold for more than two seconds to toggle the StickyTune on and off.
Press in to select semi-automatic mode, out to select automatic mode.
Press to decrease inductance.
Press to increase inductance.
Press to decrease capacitance.
Press to increase capacitance.
Press to switch main modes and setup modes.
Press in to select antenna 2, out to select antenna 1.
Press in to turn power on, out to turn power off.
Digital
Wattmeter
Power
Bar Meter
SWR
Bar Meter
L-Network
MODE
14.100 MHz 1.1
FWD=100 REF=0.5
14.100 MHz 1.1
100
14.100 MHz 1.1
Press or to turn on
or increase setting.
C-UP L-UP
C-DN L-DN
Press or to turn off
or decrease setting.
0.00uH 1.1
0pF
(while in the main modes)
Figure 9. Mode Button Flow Chart and Button Action.