background image

MFJ-9412 Instruction Manual 

12-Meter SSB Transceiver 

11 

MFJ Enterprises, Inc. warrants to the original owner of this product, if manufactured by 
MFJ Enterprises, Inc. and purchased from an authorized dealer or directly from MFJ 
Enterprises, Inc. to be free from defects in material and workmanship for a period of 12 
months from date of purchase provided the following terms of this warranty are satisfied. 

1.

 

The purchaser must retain the dated proof-of-purchase (bill of sale, canceled 
check, credit card or money order receipt, etc.) describing the product to establish 
the validity of the warranty claim and submit the original of machine reproduction 
or such proof of purchase to MFJ Enterprises, Inc. at the time of warranty service.  
MFJ Enterprises, Inc. shall have the discretion to deny warranty without dated 
proof-of-purchase.  Any evidence of alteration, erasure, or forgery shall be cause 
to void any and all warranty terms immediately. 

2.

 

MFJ Enterprises, Inc. agrees to repair or replace at MFJ's option without charge to 
the original owner any defective product under warrantee provided the product is 
returned postage prepaid to MFJ Enterprises, Inc. with a personal check, cashiers 
check, or money order for 

$7.00 

covering postage and handling. 

3.

 

MFJ Enterprises, Inc. will supply replacement parts free of charge for any MFJ 
product under warranty upon request.  A dated proof of purchase and a

 $5.00

 

personal check, cashiers check, or money order must be provided to cover postage 
and handling. 

4.

 

This warranty is 

NOT

 void for owners who attempt to repair defective units.  

Technical consultation is available by calling (601) 323-5869. 

5.

 

This warranty does not apply to kits sold by or manufactured by MFJ Enterprises, 
Inc. 

6.

 

Wired and tested PC board products are covered by this warranty provided 

only 

the wired and tested PC board product is returned.

  Wired and tested PC 

boards installed in the owner's cabinet or connected to switches, jacks, or cables, 
etc. sent to MFJ Enterprises, Inc. will be returned at the owner's expense 
unrepaired. 

7.

  

Under no circumstances is MFJ Enterprises, Inc. liable for consequential damages 
to person or property by the use of any MFJ products. 

8.

 

Out-of-Warranty Service: 

MFJ Enterprises, Inc. will repair any out-of-warranty 

product provided the unit is shipped prepaid.  All repaired units will be shipped 
COD to the owner.  Repair charges will be added to the COD fee unless other 
arrangements are made. 

9.

 

This warranty is given in lieu of any other warranty expressed or implied. 

10.

  MFJ Enterprises, Inc. reserves the right to make changes or improvements in 

design or manufacture without incurring any obligation to install such changes 
upon any of the products previously manufactured. 

11.

  All MFJ products to be serviced in-warranty or out-of-warranty should be 

addressed to 

MFJ Enterprises, Inc., 300 Industrial Park Road, Starkville, 

Mississippi 39759, USA 

and must be accompanied by a letter describing the 

problem in detail along with a copy of your dated proof-of-purchase. 

12.

 

This warranty gives you specific rights, and you may also have other rights which 

vary from state to state. 

Содержание MFJ-9412













Отзывы: