©
2006 MFJ Enterprises, Inc.
MFJ-926 Remote Automatic Antenna Tuner
Introduction
The MFJ-926 Remote Automatic Antenna Tuner is designed to cover all frequencies ranging from 1.8-30
MHz. The multi-signal processing circuit switches inductance and capacitance as needed to match the
impedance of the antenna system with your radio. Fast tuning, less than 2 seconds after initial tuning.
Two-Hundred memory channels store the minimum SWR value to make tuning fast.
Specification
Working Frequency:
1.8 – 30 MHz
Input Impendence: 50 Ohm
Max. Input Power:
200 Watts PEP
Min. Input Power:
10 Watts
Power Supply:
13.8V +/-10%
Current Drain:
<0.8A
Auto Tuning Time:
Approx. 2 sec. (first time tuning)
Memory Channels:
200
Weight:
4
lbs
Usable Wire Length:
6-30 MHz > 2.4 meters
1.8-30Mhz
>
8.0
meters
50-ohm Coax
Antenna
RF Ground
MFJ-926
+13.8VDC
Source
Figure 1. Installation Block Diagram
