MFJ MFJ-8100 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 27

MFJ MFJ-8100 Скачать руководство пользователя страница 19

MFJ-8100
World Band Receiver

19

[Author's Hint: To save you time as well as wear and tear on
the PC-board, here's what my own curiosity showed:  reducing
C3 can easily bring in 12 and 10 Meters on Band E.  However,
attempts to increase this capacitance beyond 220 pF without
ALSO increasing total inductance are pointless if you're
looking for good 160 Meter performance.]

While it's not intended as a communications receiver, the
very fact that the MFJ-8100 covers all or part of so many
different popular CW bands might intrigue some QRP
enthusiasts interested in multi-band portable trans-
receiving. The author conducted a few simple tests using an
HW-9 for transmitting, side by side with the 8100 on 30, 20,
17 and 15 meters. You will want T-R switching to short the
receiver antenna input to ground and also to mute the audio.
Plan on a separate keying sidetone. Frequency spotting must
be done with a very low RF level. Receiver stability when
switching the antenna input is amazingly good even at 21 MHz.
While the 8100 is not represented as a communications
receiver, you indeed can have some multi-band QRP fun with
it. And FUN is exactly what this great new receiver is all
about!

Look at it this way. If you take your multi-band QRP mini-
transmitter and MFJ-8100 on a trip and happen not to work DX
or anybody else, you can still dial up BBC, VOA, Moscow, and
many more places of our ever-shrinking global community!

CONCLUSION

If you really enjoy shortwave radio listening, you'll
probably yearn for and eventually get a more elaborate
receiver. You might even work on getting a ham radio license
and setting up a station for transmitting and receiving. As
the years go by, we have a hunch that you'll always remember
the first thrills of listening to your MFJ-8100. And,
because it's rugged, compact, and far more sophisticated than
the first receivers of yesteryear, we suspect you'll actually

«
...
17
18
19
20
21
...
»

Содержание MFJ-8100




























Отзывы:

Нет отзывов