MFJ MFJ-784B Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 74

MFJ MFJ-784B Скачать руководство пользователя страница 36

MFJ-784B Instruction Manual

Operation

Error! Main Document Only.

-10

Manual Notch Button

When pressed in, this button activates two manually adjustable notch filters.
Each filter removes a very narrow range of frequencies or tones. The manual
notch operates in every filter mode except when the

DSP

button is out.

The manual notch is often used to notch out one or two unwanted tones on
CW, voice or digital modes. A manually adjusted notch is the only type of notch
that operates correctly on CW and digital modes. The manual notch can also
remove warbling or buzzing carriers that the automatic notch may ignore. The
manual notch also causes less audio distortion in voice modes than an
automatic notch.

A manual notch does some things better than the automatic notch. In tone
modulated modes the automatic notch wouldn't "know" which tone you wanted
to hear and which tone was the interference. It would remove the good signals
right along with the bad signals. Since the operator can tell which tones are
not wanted, the operator can adjust the manual notch to remove them.

The

Tunable Filters

left and right knobs adjust the frequency of each notch

over the entire audio range of the filter. The manual notch bandwidth is very
narrow. Tones within 100 Hz of each notch frequency will be reduced over ten
thousand times in volume. If you only need to notch one tone, set the other

Tunable Filters

control

to any end of its range. Doing so will prevent the

unused notch from hurting the quality of the signal you want to hear.

One thing is a little tricky when using the manual notch. Since the manual notch
uses the

Tunable Filters

left and right knobs to adjust the notch frequencies,

you must select and adjust the correct main filter

before

using the manual

notch. The MFJ-784B always "remembers" the

Tunable Filters

left and right

knobs settings when the manual notch is engaged and then the

Tunable

Filters

left and right knobs will only adjust the two manual notch frequencies.

Another important thing to remember is when you release the

Manual Notch

button, the main filter will still remain exactly as it was set. The only thing that
will happen is the notch will turn off. But if you adjust or move either

Tunable

Filters

left or right knob, the main filter will quickly jump to the current control

settings. If you don't want to loose your original filter settings, don't touch the

Tunable Filters

left or right knobs after using the manual notch. You can

adjust and use the notch as much as you like without affecting the original filter
settings whenever the

Manual Notch

button is "in."

«
...
34
35
36
37
38
...
»

Содержание MFJ-784B











































































Отзывы:

Нет отзывов