MFJ MFJ-4418, Инструкция по эксплуатации

Страница: 10 / 20

Programming the MFJ-4418
The Power Booster Manager is a PC program capable of running on Windows XP, 7 and later
operating systems. It is not designed to run on Apple computers. The software and drivers are
available on the MFJ Enterprises web site.
1. Program Installation
a. Windows 7 and XP
i. DO NOT plug into the USB port on the MFJ-4418 until you install the
driver as Windows will install a generic serial USB driver which is not
compatible. To install the drivers unzip and run the MFJ-4418 Driver
Installer.exe. The program will place the drivers in the correct directory
for use.
ii. If you accidentally install the wrong driver go to the Control Panel’s
“Device Manager” window and find the device under “Ports (Com and
LPT)” or “Other Devices”. On the Driver tab select update driver. Then
select the proper driver which came with the manager program and update
it.
b. Windows 10
i. The default USB driver used by Windows 10 will work with the MFJ-
4418. There is no need to run the MFJ-4418 Driver Installer program.
ii. You can do a driver update by going to the Control Panel’s “Device
Manager” window and find the device under “Ports (Com and LPT)” and
on the Driver tab select update driver and search on the internet. The more
recent Microchip driver will be installed.
c. Unzip and run the MFJ-4418 Battery Booster Manager Installer.exe program to
install the MFJ-4418 Battery Booster Manager Program. The installer will place
an icon on the desktop to run the program.
d. Apply power to the MFJ-4418 and plug in the USB cable between the unit and the
computer. The computer should find and use the drivers to communicate with the
MFJ-4418. Use the “Ports (Com and LPT)” selection in the Device Manager on
the Control Panel and make note of the COM port number. If the COM Port is 10
or higher then change the number to something 9 or lower in the Ports Settings
tab Advanced section. The Battery Booster Program will not handle COM Ports
over COM9.